An automatic pool cover is more than a finishing touch. When selected and planned correctly, it can support a refined pool design while improving day-to-day convenience and helping to manage water, heat and debris.
Choose from concealed and above-ground integration options, subject to the pool design, dimensions and technical review.
A closed cover can help reduce evaporation and unnecessary water loss. Performance depends on use and site conditions.
Covering the pool helps reduce heat loss and evaporation. Solar polycarbonate slat options can also increase the pool water temperature by up to approximately 8°C under favourable sunny conditions, helping to further reduce reliance on conventional pool heating.
Open and close the cover with simple controls and reduce the amount of wind-blown debris entering the pool.
Select from available slat materials and colours to complement the pool, paving and surrounding architecture.
BluPool provides project coordination, installation, commissioning, client training and ongoing service support.
Early planning gives the project team more integration options and reduces the risk of costly rework.
Share the pool location, construction stage, approximate internal dimensions, drawings and your main reason for considering a cover.
BluPool reviews feasibility, likely integration options, access requirements and missing information with the relevant project professionals.
Final dimensions, system configuration, responsibilities, construction interfaces and required hold points are confirmed.
You receive a project-specific quotation based on the approved configuration, scope, exclusions, lead-time assumptions and payment stages.
The system is installed, tested and commissioned once the site-readiness requirements have been met.
BluPool provides operating guidance, records the installed system and supports future inspections, cleaning and service needs.
Send your concept drawings before the pool details are finalised.
Concealed systems require early coordination of recesses, levels, conduits, access and finishes.
Every Aquadeck® cover is configured for the project. The appropriate solution depends on the pool type, internal dimensions, construction stage, finishes, access, heating and circulation system, and the client’s priorities.
Integration options
Concealed or visible installations may be considered. Final suitability is confirmed through technical review.
Slat options
New and existing pools
Solutions can be explored for new pools, renovations and suitable existing pools. Available integration options will differ.
Professional coordination
BluPool works with the client, architect, builder, engineer and pool contractor to clarify interfaces and responsibilities.
A pool cover does not replace active supervision.
Safety performance depends on the exact system, configuration, installation, operation and maintenance. Never leave a child unsupervised near a pool. Any safety-related capability must be verified for the selected product and confirmed before installation.
BluPool combines more than 30 years of swimming-pool experience with local project support. We help clients and professionals move from early concept to a coordinated, commissioned cover system, with one accountable local team.
A niche is provided at the end of the pool. The cover is installed neatly concealed in the niche, and pool water flows through the niche to keep it clean. This arrangement allows you to use the full length of the pool.
The cover construction is installed on the bottom of the pool. A partition wall is placed as well as a stainless steel insert beam. This is closed with tiles, so you can enjoy on a shallow terrace and is ideal for the smaller children or for relaxing.
This construction is installed in the floor of the pool. The slats rise through a slot in the bottom. This construction allows you to use the full length of the pool.
The cover is mounted at the bottom of the pool and placed behind a separation wall. The separation is finished with a special PVC lounger plate that clicks into a pre-mounted stainless steel construction. In this way you can enjoy a shallow terrace, ideal for children.
Here the cover is concealed in the wall. The niche in the wall is covered by a PVC protective plate. An opening below the PVC-plate allows dirt to escape easily. This construction also allows you to benefit from the complete length of the pool.
The customised surface-mounted systems integrate seamlessly into your pool environment and are the simplest solution for existing pools.
Tell us where your project stands and upload any drawings or photographs you already have. A BluPool team member will review the enquiry and confirm the next step.
What happens next?
Different pools, buildings and landscapes call for different combinations of integration, slat material and finish. Every final configuration is reviewed for the individual project.
Possibly. The available system and level of concealment depend on the pool dimensions, structure, finishes, access and surrounding space. BluPool will assess suitability before recommending an option.
As early as possible—ideally during concept or architectural design. Early coordination creates more integration options and reduces the risk of changes later.
Yes. The cover is configured to suit the approved pool dimensions, selected system, slat material, colour and integration approach.
A closed cover can help reduce evaporation. Actual performance depends on climate, pool temperature, exposure and how consistently the cover is used.
A cover can help reduce heat loss. The result depends on the cover material, weather, heating system, pool use and operating conditions.
Do not rely on a pool cover as a substitute for adult supervision, barriers or responsible pool-safety practices. Any system-specific safety capability must be confirmed in writing for the selected configuration.
Timing is project-specific and depends on design approval, final dimensions, payment, supplier confirmation, production, freight, site readiness and installation scheduling. BluPool will provide an estimated lead time in the quotation.
Warranty terms depend on the selected equipment, slat material, installation and supplier conditions. The applicable warranty will be confirmed in the final quotation and handover documents.
Yes. BluPool supports commissioning, client training, service enquiries and planned inspection and cleaning options.
Speak to BluPool about your new pool, renovation or existing pool. Send us your plans and we’ll help identify the right next step.
Call 031 569 2092 • WhatsApp 071 559 7952 • Visit 8 Glen Anil Street, Durban North